other Jewelry Findings

The stainless steel memory wire can easily be cut to the desired length. It is suitable for bracelets without a clasp. The wire can simply be bent into a small eyelet at the end or closed with a crimp bead. With this offer you will receive 5 coils of wire with a diameter of 6 cm and a thickness of 0.6 mm. This corresponds to approx. 80-90cm of stainless steel wire.

This silver colored hat or scarf pin you can design according to your pre-stables. The needle has a length of 120mm. At the upper part is a thread, so that the spiral can be screwed on and off. At the lower part is a tip. This includes a stopper that is attached to the tip for protection. The needle has a thickness of 1.3mm, so that all beads from a hole size of 1.4mm can be wound. Due to the unscrewable end piece and the sliding bead stopper, other beads and quantities can also be strung again and again. This offer is a complete hatpin with stopper, bead stopper and spiral end piece. Material: brass platinum color alloyed.

This necklace is a DIY jewel with countless design options. On one side the chain ends with 2 eyelets and on the other side with 2 zirconia stones.The spacer bead in the middle is a stopper bead that can be moved. Use as Y chain: The chain can be further processed as a Y chain. For this purpose, you can, for example, pull any things on the chain and attach a lock to the two eyelets. Through the sliding beads, the necklace can then be varied. See our model photos in the article view. Use as short and long chain: They hang a pendant or a chain middle piece, for example made with a steel rope, into the two eyelets. The length of the chain is determined by the movable bead, with the ends of the chain being carried on the back with the sparkling zirconia stones, as a back chain. The tank chain is made of brass and high quality platinum alloy. The 2 connected chain pieces each have a length of 42 cm. Total length thus approx. 84 cm. The chain has a thickness of approx. 1.1 mm and the eyelets at the end a hole size of approx. 1.7 mm. The zirconia ends have a size of about 4 mm.

This necklace is a DIY jewel with countless design options. On one side the chain ends with 2 eyelets and on the other side with 2 zirconia stones.The spacer bead in the middle is a stopper bead that can be moved. Use as Y chain: The chain can be further processed as a Y chain. For this purpose, you can, for example, pull any things on the chain and attach a lock to the two eyelets. Through the sliding beads, the necklace can then be varied. See our model photos in the article view. Use as short and long chain: They hang a pendant or a chain middle piece, for example made with a steel rope, into the two eyelets. The length of the chain is determined by the movable bead, with the ends of the chain being carried on the back with the sparkling zirconia stones, as a back chain. The tank chain is made of brass and high quality gold colored alloy. The 2 connected chain pieces each have a length of 42 cm. Total length thus approx. 84 cm. The chain has a thickness of approx. 1.1 mm and the eyelets at the end a hole size of approx. 1.7 mm. The zirconia ends have a size of about 4 mm.

The gold coloured end cap is made of metal and has a total size of 18x13x9 mm and an inner dimension/hole size of 11x6mm. It is suitable for 2 tapes with a thickness of 5 mm. Especially for leather cords, as these can be slightly different from the thickness and this end cap special offers a little more “air”.....The tape we glued in here. The hole size of the eyelet on the cap is 5.6 mm, which makes it also very suitable for attaching charms, as key chains etc. You will receive an end cap with this special offer. The multiple illustrations, as well as the model photos, serve for better illustration.

The silver coloured end cap is made of metal and has a total size of 18x13x9 mm and an inner dimension/hole size of 11x6mm. It is suitable for 2 tapes with a thickness of 5 mm. Especially for leather cords, as these can be slightly different from the thickness and this end cap special offers a little more “air”.....The tape we glued in here. The hole size of the eyelet on the cap is 5.6 mm, which makes it also very suitable for attaching charms, as key chains etc. You will receive an end cap with this special offer. The multiple illustrations, as well as the model photos, serve for better illustration.

The old silver coloured end cap is made of metal and has a total size of 18x13x9 mm and an inner dimension/hole size of 11x6mm. It is suitable for 2 tapes with a thickness of 5 mm. Especially for leather cords, as these can be slightly different from the thickness and this end cap special offers a little more “air”.....The tape we glued in here. The hole size of the eyelet on the cap is 5.6 mm, which makes it also very suitable for attaching charms, as key chains etc. You will receive an end cap with this special offer. The multiple illustrations, as well as the model photos, serve for better illustration.

The bell is made of stainless steel and has a diameter of approx. 5 mm. The eyelet can be opened and has a diameter of approx. 2 mm. This special offer is 1 pcs.. The multiple illustration is merely an illustration.

This Y connector made of stainless steel has a size of approx.9.5x11 mm and a hole size of 5.5 mm without the eyelet. The eyelet has an internal dimension of approx. 2.5 mm. 1 pcs..

The platinum colored lobster claw clasp has a size of approx. 38x15 mm and a rotating eyelet. The key ring has a diameter of approx. 25 mm. It can be used as a locking pendant, pocket pendant, etc.

A clutch pin. The plug consists of 2 parts. A pin with a plate (diameter 10 mm) and a fastening part. In the photo you see the clutch pin once open and once closed. The pin can be designed by gluing different parts. In the model photo we show you an example. The discs, beads etc. used and illustrated here can be ordered separately. The pin is suitable for decorating garments such as blazers, scarves etc.

2 pieces Crimph sleeves – crimp connectors for connecting belts etc. The connectors have a width of 5 mm with an internal dimension of 4 mm. The length is about 4.2 mm. Colour: Platinum matt

2 pieces Crimph sleeves – crimp connectors for connecting belts etc. The connectors have a width of 5 mm with an internal dimension of 4 mm. The length is about 4.2 mm. Colour: Gold matte

This stainless steel element is suitable as a closure (see model examples) and also as a connector. It has a size of 14x12x1 mm and a hole size of 2.3 mm. It is slightly rounded. Further description in the article view.......

The plate has the dimensions of 10x1,2mm. The hole size is 2 mm. The plate is brushed and platinum colored. The hole is located in the upper third of the platelet. 1 pcs..

This Y connector made of stainless steel has a size of approx. 5x6.5 mm and a hole size of 3.8 mm without the eyelet. The eyelet has an internal dimension of approx. 2 mm.

A holder incl. eyelet for eyewear. The black silicone loop is about 2 cm long. The silver coloured metal centerpiece can be moved to determine the holder on the glasses. The silver coloured eyelet can be bent up. Thus, end caps or the like of tapes can be hung here.

This Y connector made of metal has a size of approx. 5x8 mm and a hole size of 5.2 mm without the eyelet. The eyelet has an internal dimension of approx. 2 mm.

Pendant with engraving “Handmade”. The pendant has a size of approx. 11 mm and the binding ring has an external dimension of approx. 8 mm.

You can use this guardian angel as a mobile phone holder or also for the keychain etc. No matter where you are, your guardian angel can always be there. The silver coloured angel is made of metal and approx. 20x14 mm. The black band has a length of approx. 5 cm. The total length is about 7.3 cm.

This jewelry clip or also jewelry clamp is outside14x14 mm large. The rectangle is covered with crystal clear rhinestones. The interior is about 8x8 mm in size. The jewelry clip can be used a.o. for trimming textiles. However, the brackets can also be bent to the eye and so they can also be processed as an spacer.

This jewelry clip or also jewelry clamp is outside14x14 mm large. The rectangle is covered with crystal clear rhinestones. The interior is about 8x8 mm in size. The jewelry clip can be used a.o. for trimming textiles. However, the brackets can also be bent to the eye and so they can also be processed as an spacer.

This jewelry clip or also jewelry clamp is outside14x14 mm large. The rectangle is covered with crystal clear rhinestones. The interior is about 8x8 mm in size. The jewelry clip can be used a.o. for trimming textiles. However, the brackets can also be bent to the eye and so they can also be processed as an spacer.

This metal Y connector has a size of 5x7 mm and a hole size of 3.8 mm without the eyelet.