Threaded rod with a length of 50 mm platinum coloured. The rod can be used for earrings, pendants and much more. Beads can then be raised on the rod at will. The rod is then closed with a threaded endpiece (to be ordered separately). The threaded threaded pin have a thickness of 1.26 mm. The diameter of the eyelets is 4.2 mm on the outside and just under 1.9 mm inside.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
The ends are simply placed on top of each other and the interchangeable rod is inserted. Depending on the tape, these must be punched beforehand. The interchangeable rod has a usable length of 8 mm. Of course, you also have to calculate the double-layered tape. In the detailed view you will find more model photos. This special offer is a rod including the 4 mm crystal ball, which is screwed on. The ball is set with a crystal. The crystal can be ordered in different colours. The threads of the threaded pin are not compatible with the rotary parts from our other removable jewelry series and can only be purchased completely (bar + ball), as special offered here.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
This threaded robe is made of stainless steel and has a diameter of approx. 5,5mx6,5mm. It is suitable for screwing on our threaded threaded pin for vertical interchangeable rings or pendants. The roundel is set with a large, sparkling crystal. This can be ordered in different colors. This threaded part is not compatible with the rotary parts from our other removable jewelry series. Compatible with this “top” are all thread bars, starting with the article number ZS-WS-... This is a roundel with thread in the crystal color to be selected. All other parts shown can be ordered separately and serve only as a model example.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
This interchangeable rod is made of stainless steel and has a “assemblable” length of 10 mm. It is particularly suitable for our interchangeable rings (a.o. article: ZS-WR, as well as for use with flat strips. In addition, it can also be used for staging supporters. In the detailed view you will find more model photos. This is the one depicted individually. The tops for writing down, as well as other illustrated model parts can be ordered separately. The threads of the threaded pin are not compatible with the rotary parts from our other removable jewelry series. All rotary parts starting with the article number ZS-WT-...
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
This interchangeable rod is made of stainless steel and has a “assemblable” length of 14 mm. It is particularly suitable for our interchangeable rings (a.o. article: ZS-WR), as well as for use with flat strips. In addition, it can also be used for staging supporters. In the detailed view you will find more model photos. This is the one depicted individually. The tops for writing down, as well as other illustrated model parts can be ordered separately. The threads of the threaded pin are not compatible with the rotary parts from our other removable jewelry series. All rotary parts starting with the article number ZS-WT-...
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
This interchangeable rod is made of stainless steel and has a “assemblable” length of 12 mm. It is particularly suitable for our interchangeable rings (a.o. article: ZS-WR, as well as for use with flat strips. In addition, it can also be used for staging supporters. In the detailed view you will find more model photos. This is the one depicted individually. The tops for writing down, as well as other illustrated model parts can be ordered separately. The threads of the threaded pin are not compatible with the rotary parts from our other removable jewelry series. All rotary parts starting with the article number ZS-WT-...
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
This threaded ball is made of stainless steel and has a diameter of 5 mm. It is suitable for screwing on our thread bars for vertical interchangeable rings. This threaded part is not compatible with the rotary parts from our other removable jewelry series. Compatible with this “top” are all thread bars, starting with the article number ZS-WS-...
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
This threaded ball is made of stainless steel and has a diameter of 5 mm. It is suitable for screwing on our thread bars for vertical interchangeable rings. The sphere is set with a large, clearly sparkling crystal. This threaded part is not compatible with the rotary parts from our other removable jewelry series. Compatible with this “top” are all thread bars, starting with the article number ZS-WS-...
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Genuine gold-plated threaded rod with a length of 35 mm. The rod can be used for earrings, pendants and much more. Beads can then be raised on the rod at will. The rod is then closed with a threaded endpiece (to be ordered separately). The threaded threaded pin have a thickness of 1.26 mm. The diameter of the eyelets is 4.2 mm on the outside and just under 1.9 mm inside.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Ball 6 mm with female thread as end piece for threaded threaded pin or flashes – color platinum. The ball is screwed onto the threaded pin or flashes at the end. (Thread bars are to be ordered separately.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Rod with double thread, length 35 mm, rhodium plated. You need this rod a.o. to connect PVC flat strips for horizontal interchangeable rings. The beads are attached to the rod and the end parts are screwed on. It’s just the staff. The end parts must be ordered separately.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
gold-plated, short, smooth tip with internal thread as end piece for threaded threaded pin or flashes. The tip is screwed onto the threaded pin or flashes at the end. (Threads or flashes are to be ordered separately.) The tip has a length of 7.8 mm and a diameter of 5.5 mm above.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
genuine gold-plated, smooth cube, ca.4mm, with female thread as end piece for threaded threaded pin or flashes. The tip is screwed onto the threaded pin or flashes at the end. (Thread threaded pin or “flashes” are to be ordered separately.)
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Smooth cube ca.4mm, with female thread as end piece for threaded threaded pin – color platinum. The cube is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.)
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Short, smooth lace with female thread as end piece for threaded threaded pin – color platinum. The tip is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.) The tip has a length of 7.8 mm and a diameter of 5.5 mm above.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Genuine gold-plated threaded rod with a length of 70 mm. The rod can be processed as a pendant and much more. Beads can then be raised on the rod at will. The rod is then closed with a threaded endpiece (to be ordered separately). The threaded threaded pin have a thickness of 1.26 mm. The diameter of the eyelets is 4.2 mm on the outside and just under 1.9 mm inside.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Spiral 10x6 mm with female thread as end piece for threaded threaded pin – color platinum. The ball is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.)
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
genuine gilded long lace with internal thread as end piece for threaded threaded pin or flashes. The tip is screwed onto the threaded pin or flashes at the end. (Thread threaded pin or “flashes” are to be ordered separately.)
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Long lace with internal thread as end piece for threaded threaded pin – color platinum. The tip is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.)
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Threaded rod with a length of 70 mm platinum coloured. The rod can be used for earrings, pendants and much more. Beads can then be raised on the rod at will. The rod is then closed with a threaded endpiece (to be ordered separately). The threaded threaded pin have a thickness of 1.26 mm. The diameter of the eyelets is 4.2 mm on the outside and just under 1.9 mm inside.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Threaded rod with a length of 45 mm platinum coloured. The rod can be used for earrings, pendants and much more. Beads can then be raised on the rod at will. The rod is then closed with a threaded endpiece (to be ordered separately). The threaded threaded pin have a thickness of 1.26 mm. The diameter of the eyelets is 4.2 mm on the outside and just under 1.9 mm inside.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Threaded rod with a length of 25 mm platinum coloured. The rod can be used for earrings, pendants and much more. Beads can then be raised on the rod at will. The rod is then closed with a threaded endpiece (to be ordered separately). The threaded threaded pin have a thickness of 1.26 mm. The diameter of the eyelets is 4.2 mm on the outside and just under 1.9 mm inside.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Genuine gold-plated threaded rod with a length of 55 mm. The rod can be used for earrings, pendants and much more. Beads can then be raised on the rod at will. The rod is then closed with a threaded endpiece (to be ordered separately). The threaded threaded pin have a thickness of 1.26 mm. The diameter of the eyelets is 4.2 mm on the outside and just under 1.9 mm inside.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Genuine gold-plated threaded rod with a length of 45 mm. The rod can be used for earrings, pendants and much more. Beads can then be raised on the rod at will. The rod is then closed with a threaded endpiece (to be ordered separately). The threaded threaded pin have a thickness of 1.26 mm. The diameter of the eyelets is 4.2 mm on the outside and just under 1.9 mm inside.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration