Stainless steel clasp. The closure is completely made of stainless steel and suitable for sticking 2,5 mm thick tapes. The lobster claw clasp has a size of 10 mm and the entire closure has a length of approx. 3.3 cm. The extender chain has a length of about 5 cm. The tape is simply glued into the end caps.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Completely assembled closure made of stainless steel. The end caps are suitable for stringing silk that is knotted at the end or for steel wire rope where you then put a crimp bead at the end, which you insert into the closure. The ribbon or steel cable is threaded through the center into the crimp bead. The lobster clasp has a size of 10 mm. With the approx. 5 cm long extension chain, you can then additionally vary the length of the chain. Further dimensions can be seen on the photo in the article view.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel clasp. The clasp is completely made of stainless steel and is suitable for bands up to 4mm. The lobster claw has a size of 12mm and the entire clasp has a length of approx. 3.5cm. The extender chain is approx. 4.5cm long. The individual end caps are 10.4mm long and 5mm wide. Simply insert the ribbon into the end caps and press the end caps firmly together with pliers.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Elegant stainless steel slide clasp for pearl necklaces. The clasp is 21mm long, 8mm wide and 5mm thick. The eyelets have a hole size of 1.2mm
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Elegant stainless steel gold colored slide clasp for pearl necklaces. The clasp is 21mm long, 8mm wide and 5mm thick. The eyelets have a hole size of 1.2mm
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel toggle clasp. Length of the ring incl. eyelet 16.5mm. The ring has an outer diameter of 12mm. The eyelets have an inner diameter of 3mm. The bar is 18mm long and the whole clasp is 2mm thick..
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
One-sided pre-assembled black steel wire, Premium High Quality, with a 10mm plastic magnetic clasp, colour black, for stringing pearl necklaces and chokers. The 0.5 mm thick, nylon coated steel wire has a length of approx. 80 cm and can therefore be shortened to the desired length. On one side is a magnetic clasp that has been attached to the steel cable with 2 crimp beads. The 2 loose crimp beads are used to close the other end on the clasp. This article is especially suitable for people who have problems with metal allergies, as the clasp is made of plastic and the steel wire is also nylon coated . Only the small squeeze beads are made of metal. These are produced in Germany and, depending on the beads which you will use for the steel wire, usually this one do not touch the skin.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
One-sided pre-assembled steel rope, Premium High Quality, with a 8 mm, genuinely gold-plated, stainless steel Magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel Magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
One-sided pre-assembled steel rope, Premium High Quality, with a 12 mm stainless steel Magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel Magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
The lock holds by counterpressure of the inner part. It is pressed one ax together and is released by pulling on both shutter parts. The closure has an inner diameter of 3 mm and an outdoor diameter of 4 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel click closure. The lock “clicks” firmly together by counterpressure and is released by pulling on both shutter parts. The closure has an inner diameter of 2 mm and an outdoor diameter of 3 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel sliding closure for 5-row chains and bracelets. The clasp has a size of 30,5x11x5mm. The hole sizes are approx.1.5mm.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel sliding closure for 3-row chains and bracelets. The clasp has a size of 20x10x6,5mm. The hole sizes are about 2 mm.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Hose closure for hollow rubber/rubber hose. The closure is simply pushed firmly into the hose on both sides.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel gag closure consisting of 2 parts. The gag has a width of 24 mm. The outer shells have a dimension of 12,3x7.3 mm and an inner dimension of 10.3x5.4mm. The pictured model is made with 5 mm rubber cord. Of course, you can also process several thinner ribbons with this. This special offer is the individually illustrated, 2-piece closure.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel bayonet closure. The closure is simply plugged together at the place marked by a small notch and then turned. The closure has an inner diameter of 3.1 mm and an outer diameter of just under 4 mm, which means it fits through all hole sizes from 4 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure. The closure has a total length of 2 cm.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel closure. The closure is completely made of stainless steel and suitable for sticking 5 mm thick tapes. The lobster claw clasp has a size of 12 mm and the entire closure has a length of approx. 3.9 cm. The tape is simply glued into the end caps.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel clasp. The closure is completely made of stainless steel and suitable for sticking 3 mm thick tapes. The lobster claw clasp has a size of 10 mm and the entire closure has a length of approx. 3.3 cm. The tape is simply glued into the end caps.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel clasp. The closure is completely made of stainless steel and suitable for sticking 4 mm thick tapes. The lobster claw clasp has a size of 10 mm and the entire closure has a length of approx. 3.3 cm. The extender chain has a length of about 5 cm. The tape is simply glued into the end caps.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel clasp. The closure is completely made of stainless steel and suitable for sticking 5 mm thick tapes. The lobster claw clasp has a size of 12 mm and the entire closure has a length of approx. 3.5 cm. The extender chain has a length of about 5 cm. The tape is simply glued into the end caps.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel clasp. The closure is completely made of stainless steel and suitable for sticking 5 mm thick tapes. The lobster claw clasp has a size of 13 mm and the entire closure has a length of approx. 4.5 cm. The extender chain has a length of about 5 cm. The tape is simply glued into the end caps.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Completely mounted, platinum coloured closure for rubber cord, fabric tape, organza tape, textile tape, steel rope etc. The end caps are suitable for all bands up to 3 mm thickness. The lobster claw clasp has a size of 12 mm. With the approx. 4 cm long extender chain you can then also vary the length of the chain.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Stainless steel bayonet closure. The closure is simply plugged together at the place marked by a small notch and then turned. The closure has an inner diameter of 2.1 mm and an outer diameter of just under 3 mm, which means it fits through all hole sizes from 3 mm. Total length 18 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure. Total length 18 mm.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Completely mounted, rose gold colored closure for rubber cord, fabric tape, organza tape, textile tape, steel rope etc. The end caps are suitable for all bands up to 3 mm thickness. The lobster claw clasp has a size of 12 mm. With the approx. 4 cm long extender chain you can then also vary the length of the chain. The tape is simply inserted into the end caps of the closure and these are then pressed together with a pliers.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration