Sterling Silver 925 - Locks + Closures

lobster claw clasp 12x7x3mm with eyelet 4,5mm x 0,8mm made of 925 silver in the best quality.

Lobster claw clasp 13x7x4,5mm with eyelet 5,2mm x 1mm made of 925 silver in the best quality.

2 pieces of end caps made of 925 silver. The end caps have an inner dimension of 2 mm and form a nice finish. Tapes with a diameter of 2 mm can be easily glued in here.

2 pieces end caps/finishing caps made of 925 silver. The end caps run from 5 mm at the beginning and 2 mm at the end conical. The hole size at the end is 1 mm. The caps are matt brushed and have a very solid finish.

10 piece thread ends made of 925 silver. These endpieces can be used for strips and steel ropes up to 0.5 mm and form a nice finish. The inner diameter of the end eye is 1.3 mm.

2 pieces of end caps made of 925 silver. The end caps have an inner dimension of 1.5 mm and form a nice finish. Tapes with a diameter of 1 to 1.5 mm can be easily glued in here.

Lobster claw clasp13x7x3,7mm made of 925 silver- best quality.

Ring-shaped closure made of 925 silver – brushed. Each part has a diameter of approx. 20 mm on the outside. The ring itself has a “wall” width of approx. 6.3 mm and a “wall” thickness of approx.1.4mm. The 2 rings are hung in each other and then have a width of approx. 3.7 cm, including the eyelets used for fastening the tape material.

“S” closure made of 925 silver. The closure has the dimensions of approx.30x12x2mm, plus two 6 mm large binding rings.

“S” closure made of 925 silver. The closure has the dimensions of approx.21x8x2mm, plus two 8 mm large binding rings.

6 pieces of open eyelets/bindingrings made of 925 silver. They have a size of approx.6 mm and a thickness of approx. 0,8 mm.

1 grams – approx. 45 pieces melted beads made of 925 silver. The melting beads have an inner diameter of approx.0.9 mm and an outer diameter of approx.2mm. When ordering the quantity of 10 you will receive a total of 10 grams.

925 silver plug-in closure with an internal cloth knife of approx.0,5mm. Outside approx. 1,5 mm. Length approx. 4.8 cm.

Ring-shaped closure made of 925 silver – brushed. Each part has a diameter of approx. 20 mm on the outside. The ring itself has a “wall” width of approx. 5 mm and a “wall” thickness of approx.1mm.

1 grams – approx. 37 pieces of crushed beads (tubes) made of 925 silver. The melting beads have an inner diameter of approx.1.2 mm and an external dimension of approx.2x2mm. When ordering the quantity of 10 you will receive a total of 10 grams.

2 pieces of final plates, which serve as the counterpart of a lobster claw clasp. The plates are made of 925 silver and also stamped with 925.

Ring-shaped closure made of 925 silver, genuine gilded – brushed. Each part has a diameter of approx. 17 mm on the outside. The ring itself has a “wall” width of approx. 5 mm and a “wall” thickness of approx.1mm.

Ring-shaped closure made of 925 silver – brushed. Each part has a diameter of approx. 15 mm on the outside. The ring itself has a “wall” width of approx. 5 mm and a “wall” thickness of approx.1.4mm.

One side pre-assembled steel rope 80 cm, Premium High Quality, with a lobster claw clasp closure made of 925 silver for threading bead necklaces and necklaces. The steel rope can be cut individually.

Closure in rectangular shape made of 925 syllable, genuine gilded – brushed, -massive version. Each part has a diameter of approx.17mm on the outside. The square itself has a “wall” width of approx.6 mm and a “wall” thickness of approx.1.2 mm.

Closure in rectangular shape made of 925 silver – brushed, solid finish. Each part has a diameter of approx.17mm on the outside. The square itself has a “wall” width of approx.6 mm and a “wall” thickness of approx.1.2 mm.