Fingerring adjustable in stainless steel. The plate has a diameter of 18 mm. Suitable for 16 mm cabochons. When the ring rail is completely closed, it has an inner diameter of 17 mm. This can be enlarged, but can also be reduced by overlapping the ring rail. The ring rail has a width of approx.4mm.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
This bead cap is made of gold-colored stainless steel and has a size of 8mm. It has a hole of 1mm. This offer is for one bead cap. Multiple images are for illustration purposes only.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
The stainless steel memory wire can easily be cut to the desired length. It is suitable for bracelets without a clasp. The wire can simply be bent into a small eyelet at the end or closed with a crimp bead. With this offer you will receive 5 coils of wire with a diameter of 6 cm and a thickness of 0.6 mm. This corresponds to approx. 80-90cm of stainless steel wire.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
This great little heart has a size of 10x14x0.8mm and can be used as a pendant or jewellery connector. The element is made of stainless steel and has a hole size of 1.4mm. This offer is for 1 piece.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
This bead cap is made of stainless steel gold coloured and has a size of 8mm. It has a hole of 1mm. This offer is for one bead cap. Multiple images are for illustration purposes only.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
This bead cap is made of stainless steel and has a size of 7mm. It has a hole of 1mm. This offer is for one bead cap. Multiple images are for illustration purposes only.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Jewellery connector Hamsa / Hand of Fatima. Versatile connector element made of stainless steel. The element has a size of approx. 15x10x1mm and a hole size of 1.5mm. This offer is for 1 piece. The multiple illustration is for front and back view.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
The pendant frame is made of stainless steel and has an outer dimension of approx. 18mm and an inner dimension of 16mm. The sides have an edge height of about 2mm. The eyelet has a hole size of 2,2mm. This offer is for one pendant. The multiple image is for illustration purposes. The frame can be used as a setting for cabochons but also for many other things you want to glue in.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
The pendant frame is made of stainless steel and has an outer dimension of approx. 14mm and an inner dimension of 12mm. The sides have an edge height of about 1.8mm. The eyelet has a hole size of 1.8mm. This offer is for one pendant. The multiple image is for illustration purposes. The frame can be used as a setting for cabochons but also for many other things you want to glue in.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
An open necklace loop made of stainless steel gold colored with dimensions 8,7x3,7mm. The beautiful and filigree loop is suitable for chains up to a diameter of 3 mm. The loop can also be bent.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
10 headpins made of stainless steel gold colored to bend, connect, etc.. The headpins have a flat "head" with a diameter of approx.1.5mm. Length 5cm, thickness 0,7mm. 1 pack á 10 pieces. With an order of 5 you will get 5 x 10 = 50 pcs. ....
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
10 eyepins made of stainless steel gold colored to bend, connect, etc.. The eyepins have an eyelet with a diameter of ca.2mm. Length 5cm, thickness 0.6mm. 1 pack á 10 pieces. With an order of 5 you will get 5 x 10= 50 pcs. ....
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Extender chain with a length of approx. 5cm. The chain has an approx. 9x5x1mm plates as a final. The chain links have a thickness of 0.5mm and the eyelets a size of 3x4mm. The complete extender chain is made of stainless steel and gold coloured.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
20 headpins made of stainless steel to bend, connect, etc.. The headpins have a flat "head" with a diameter of ca.1,5mm. Length 7cm, thickness 0,7mm. 1 pack á 20 pieces. With an order of 10 you get 10 pack á 20 pcs. ....
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
One-sided pre-assembled steel rope, Premium High Quality, with a 8 mm, genuinely gold-plated, stainless steel Magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel Magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
One-sided pre-assembled steel rope, Premium High Quality, with a 12 mm stainless steel Magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel Magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Versatile connector element made of stainless steel. The element has a size of 21x14x2 mm and a hole size of 2 mm. The inside diameter for sticking cabochons is 12 mm.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Finger ring adjustable in stainless steel. The plate has a diameter of 14 mm. Suitable for 12 mm cabochons. When the ring rail is completely closed, it has an inner diameter of 17 mm. This can be enlarged, but can also be reduced by overlapping the ring rail. The ring rail has a width of approx. 4.9 mm.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
The pendant frame is made of stainless steel and has an external dimension of approx. 27 mm and an inner dimension of 25 mm. The sides have an edge height of approx. 1.8 mm. The pendant loop has a hole size of approx. 7x3,3mm. This special offer is the empty frame individually depicted. All other parts shown on the model photos can be ordered separately. The frame can be used as a version for cabochons but also for many other things you want to glue in.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
The pendant frame is made of stainless steel and has an external dimension of approx. 14 mm and an inner dimension of 12 mm. The sides have an edge height of approx. 1.8 mm. The pendant loop has a hole size of approx. 4x3mm. This special offer is the empty frame individually depicted. All other parts shown on the model photos can be ordered separately. The frame can be used as a version for cabochons but also for many other things you want to glue in.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
The pendant frame is made of stainless steel, gold colored and has an external dimension of approx. 27 mm and an inner dimension of 25 mm. The sides have an edge height of approx. 1.8 mm. The pendant loop has a hole size of approx. 7x3,3mm. This special offer is the empty frame individually depicted. All other parts shown on the model photos can be ordered separately. The frame can be used as a version for cabochons but also for many other things you want to glue in.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
The pendant frame is made of stainless steel, gold colored and has an external dimension of approx. 14 mm and an inner dimension of 12 mm. The sides have an edge height of approx. 1.8 mm. The pendant loop has a hole size of approx. 4x3mm. This special offer is the empty frame individually depicted. All other parts shown on the model photos can be ordered separately. The frame can be used as a version for cabochons but also for many other things you want to glue in.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
Clip ring or hanging clip for combining chains or as a chain hanger for charms etc. The ring is made of stainless steel and has an outer diameter of 13 mm. It is 6 mm wide and the clip opening is 8.5 mm, so it is suitable for chains up to 8 mm. The clip is pulled apart manually and pressed together again. It has a bendable eyelet with a hole size of 2.2 mm below. This special offer is 1 pcs.. The double illustration merely serves as a better illustration.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration
An open necklace loop made of stainless steel with dimensions 8,7x3,7mm. The beautiful and filigree loop is suitable for chains up to a diameter of 3 mm. The loop can also be bent.
To see the prices you must be a registrated retailer.
retailer registration
retailer registration