Coral

One-sided pre-assembled black steel wire, Premium High Quality, with a 10mm plastic magnetic clasp, colour black, for stringing pearl necklaces and chokers. The 0.5 mm thick, nylon coated steel wire has a length of approx. 80 cm and can therefore be shortened to the desired length. On one side is a magnetic clasp that has been attached to the steel cable with 2 crimp beads. The 2 loose crimp beads are used to close the other end on the clasp. This article is especially suitable for people who have problems with metal allergies, as the clasp is made of plastic and the steel wire is also nylon coated . Only the small squeeze beads are made of metal. These are produced in Germany and, depending on the beads which you will use for the steel wire, usually this one do not touch the skin.

One-sided pre-assembled steel rope, Premium High Quality, with a 8 mm, genuinely gold-plated, stainless steel Magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel Magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.

One-sided pre-assembled steel rope, Premium High Quality, with a 12 mm stainless steel Magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel Magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.

One strand – 40 cm polished foam coral disc straight, drilled horizontally with a size of approx. 30x7mm. Due to the natural nature of the foam coral, each part is a single piece in which color differences and possibly minimal deviations in the sizes are normal and unavoidable.

One strand – 40 cm polished foam coral disc straight, drilled horizontally with a size of approx. 26x8mm. Due to the natural nature of the foam coral, each part is a single piece in which color differences and possibly minimal deviations in the sizes are normal and unavoidable.

One-sided pre-assembled steel rope, Premium High Quality, with a 12 mm magnetic clasp, color silver, for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.

One-sided pre-assembled steel rope, Premium High Quality, with a 10 mm, genuinely gold-plated, stainless steel Magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel Magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.

One-sided pre-assembled steel rope, Premium High Quality, with a 10 mm stainless steel Magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel Magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.

One-sided pre-assembled steel rope, Premium High Quality, with a 10 mm magnetic clasp, color platinum, for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.

One-sided pre-assembled steel rope, Premium High Quality with a 10 mm, gold coloured magnetic clasp, for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.

One-sided pre-assembled steel rope, Premium High Quality with a 10 mm gold coloured magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.

One-sided pre-assembled steel rope, Premium High Quality, with a 11 mm stainless steel lobster claw clasp closure for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel lobster claw clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose beads are used to close the other end of the blasting ring. Due to the closure with 2 squeezing beads and the blasting ring, this model is also suitable for very heavy chains.

1 strand balls made of foam coral polished approx. 40 cm, size 10 mm, drilled.

40 cm cube made of polished foam coral in size 14x14mm. The cubes are just drilled. Due to the natural nature of the foam coral, each part is a single piece in which color differences and possibly minimal deviations in the sizes are normal and unavoidable.

A strand with approx. 40 cm foam coral lenses drilled diagonally with a size of approx. 20x5mm. Through the diagonal bore, the discs, when pulled up in a row, lie scaled. Due to the natural nature of the foam coral, each part is a single piece in which color differences and possibly minimal deviations in the sizes are normal and unavoidable.

A strand with approx. 40 cm foam coral lenses drilled diagonally with a size of approx. 26x7mm. Through the diagonal bore, the discs, when pulled up in a row, lie scaled. Due to the natural nature of the foam coral, each part is a single piece in which color differences and possibly minimal deviations in the sizes are normal and unavoidable.

A strand with approx. 40 cm foam coral lenses drilled diagonally with a size of approx. 30x6mm. Through the diagonal bore, the discs, when pulled up in a row, lie scaled. Due to the natural nature of the foam coral, each part is a single piece in which color differences and possibly minimal deviations in the sizes are normal and unavoidable.

1 strand approx.40 cm cube made of foam coral in size 12x12mm. The cubes are drilled diagonally.

1 strand approx.40 cm cube made of foam coral in size 6x6mm. The cubes are drilled diagonally.

1 strand approx.40 cm cube made of foam coral in size 8x8mm. The cubes are drilled diagonally.

1 strand approx.40 cm cube made of foam coral in size 10x10mm. The cubes are drilled diagonally.

Ball made of foam coral polished, size 24 mm, drilled.

1 strand balls made of foam coral polished approx. 40 cm, size 24 mm, drilled.

1 strand balls made of foam coral polished approx. 40 cm, size 22 mm, drilled.