items from Kreativ-Design, Beate Ziegler-Rappika & Uwe Gersch GbR

Clip ring or hanging clip for combining chains or as a chain hanger for charms etc. The ring is made of stainless steel and has an outer diameter of 13 mm. It is 6 mm wide and the clip opening is 8.5 mm, so it is suitable for chains up to 8 mm. The clip is pulled apart manually and pressed together again. It has a bendable eyelet with a hole size of 2.2 mm below. This special offer is 1 pcs.. The double illustration merely serves as a better illustration.

The silver coloured end cap is made of metal and has a total size of 18x13x9 mm and an inner dimension/hole size of 11x6mm. It is suitable for 2 tapes with a thickness of 5 mm. Especially for leather cords, as these can be slightly different from the thickness and this end cap special offers a little more “air”.....The tape we glued in here. The hole size of the eyelet on the cap is 5.6 mm, which makes it also very suitable for attaching charms, as key chains etc. You will receive an end cap with this special offer. The multiple illustrations, as well as the model photos, serve for better illustration.

The old silver coloured end cap is made of metal and has a total size of 18x13x9 mm and an inner dimension/hole size of 11x6mm. It is suitable for 2 tapes with a thickness of 5 mm. Especially for leather cords, as these can be slightly different from the thickness and this end cap special offers a little more “air”.....The tape we glued in here. The hole size of the eyelet on the cap is 5.6 mm, which makes it also very suitable for attaching charms, as key chains etc. You will receive an end cap with this special offer. The multiple illustrations, as well as the model photos, serve for better illustration.

The gold coloured end cap is made of metal and has a total size of 18x13x9 mm and an inner dimension/hole size of 11x6mm. It is suitable for 2 tapes with a thickness of 5 mm. Especially for leather cords, as these can be slightly different from the thickness and this end cap special offers a little more “air”.....The tape we glued in here. The hole size of the eyelet on the cap is 5.6 mm, which makes it also very suitable for attaching charms, as key chains etc. You will receive an end cap with this special offer. The multiple illustrations, as well as the model photos, serve for better illustration.

This unusual star has a size of approx. 7 cm. It is made of metal, 2.2 mm thick and in the color old silver. The hole size of the eyelet is 5.3 mm. The pendant is very suitable for long chains, but can also be worn briefly. Our Collierschlaufe articles are suitable for this: ZS-529. See model photos as examples of use.

This extravagant statement pendant has a size of about 6 cm. It is made of metal, 3 mm thick and silver in colour. The hole size of the eyelet is 5x6mm. See model photos as an example of use. This special offer is only the pendant. You can also order the chain with rubber closure and pendant complete. (Article: KD-170s)

This extravagant statement pendant has a size of about 6 cm. It is made of metal, 3 mm thick and has the colour gold. The hole size of the eyelet is 5x6mm. See model photos as an example of use. This special offer is only the pendant. You can also order the chain with rubber closure and pendant complete. (Article: KD-170 g)

This necklace is a DIY jewel with countless design options. On one side the chain ends with 2 eyelets and on the other side with 2 zirconia stones.The spacer bead in the middle is a stopper bead that can be moved. Use as Y chain: The chain can be further processed as a Y chain. For this purpose, you can, for example, pull any things on the chain and attach a lock to the two eyelets. Through the sliding beads, the necklace can then be varied. See our model photos in the article view. Use as short and long chain: They hang a pendant or a chain middle piece, for example made with a steel rope, into the two eyelets. The length of the chain is determined by the movable bead, with the ends of the chain being carried on the back with the sparkling zirconia stones, as a back chain. The tank chain is made of brass and high quality platinum alloy. The 2 connected chain pieces each have a length of 42 cm. Total length thus approx. 84 cm. The chain has a thickness of approx. 1.1 mm and the eyelets at the end a hole size of approx. 1.7 mm. The zirconia ends have a size of about 4 mm.

This necklace is a DIY jewel with countless design options. On one side the chain ends with 2 eyelets and on the other side with 2 zirconia stones.The spacer bead in the middle is a stopper bead that can be moved. Use as Y chain: The chain can be further processed as a Y chain. For this purpose, you can, for example, pull any things on the chain and attach a lock to the two eyelets. Through the sliding beads, the necklace can then be varied. See our model photos in the article view. Use as short and long chain: They hang a pendant or a chain middle piece, for example made with a steel rope, into the two eyelets. The length of the chain is determined by the movable bead, with the ends of the chain being carried on the back with the sparkling zirconia stones, as a back chain. The tank chain is made of brass and high quality gold colored alloy. The 2 connected chain pieces each have a length of 42 cm. Total length thus approx. 84 cm. The chain has a thickness of approx. 1.1 mm and the eyelets at the end a hole size of approx. 1.7 mm. The zirconia ends have a size of about 4 mm.

Old copper coloured vaporised plastic bead in wavy shape with a size of 20 mm. Hole size 2,8 mm. Thus it fits on our steel rope colliers (0.5 mm) with plug closure up to 7 rows. 1 pcs.. The multiple illustrations and the model example serve as a better illustration.

This 20 mm acrylic bead is covered with fine glitter dust in the color sapphire blue. Hole size 3,3 mm. Thus it also fits on our 7-row steel rope colliers (0.5 mm) with plug-in closure and on our 2 mm rubber chains with click closure. 1 pcs.. The model photos are merely a better illustration.

This 20 mm acrylic bead is covered with fine glitter dust in the color silver. Hole size 3,3 mm. Thus it also fits on our 7-row steel rope colliers (0.5 mm) with plug-in closure and on our 2 mm rubber chains with click closure. 1 pcs.. The model photos are merely a better illustration.

Platinum coloured vaporised plastic bead in wave shape with a size of 20 mm. Hole size 2,8 mm. Thus it fits on our steel rope colliers (0.5 mm) with plug closure up to 7 rows. 1 pcs.. The multiple illustrations and the model example serve as a better illustration.

Gold-bronze coloured vaporised plastic bead with a size of 20 mm. Hole size 2,6 mm. Thus it fits on our steel rope colliers (0.5 mm) with plug closure up to 7 rows. 1 pcs.. The multiple illustrations and the model example serve as a better illustration.

Plastic bead, 20 mm, with a very unusual optics. White fragments are poured into the bead which, depending on your location and size, more or less shine through. The bead has a hole size of approx.2.2 mm and is suitable for our 3-row steel rope colliers (0.5 mm) with plug-in closure.

Plastic bead, 20 mm, with a very unusual optics. White fragments are poured into the bead which, depending on your location and size, more or less shine through. The bead has a hole size of approx.2.2 mm and is suitable for our 3-row steel rope colliers (0.5 mm) with plug-in closure.

Stainless steel tube with a length of 7 mm and a thickness of 4.5 mm. The hole size is 1.5 mm which makes this tube very nice to thread (as an intermediate piece). This special offer is 1 pcs.. The model photos serve as an example of use.

10 pieces Miracle Elypses with a size of 23x14x5 mm and a hole size of approx. 1 mm. A mix of different colors – but colours can also be included several times. You can see model photos as an example in the article view. Miracle Beads or Magic Beads have an indescribably mystical effect. These beads glow as if there was a flare in the bead.

Necklace made of 20 mm beads. Colors: Blackberry, pink, silver. Mosaic beads, polaris beads, wave beads + shamball aperles. The necklace has a length of about 50 cm. With 20 mm large beads, however, the worn length is slightly shorter. The safe, matt Magnetic clasp is made of stainless steel.

Necklace made of 20 mm beads. Colors: Orange, blue, white. Glitter dust beads, polaris beads, Miracle beads + resin beads. The necklace has a length of 50 cm. With 20 mm large beads, however, the worn length is slightly shorter. The safe, matt Magnetic clasp is made of stainless steel.

50 cm long + 5 mm thick rubber band with lobster clasp. The unusual pendant has a size of about 6 cm and is an absolute eye-catcher. Colour: Silver

50 cm long + 5 mm thick rubber band with lobster clasp. The unusual pendant has a size of about 6 cm and is an absolute eye-catcher. Colour: Gold

Necklace made of 20 mm beads. Colors: Terracotta, ruby, silver. Mosaic beads, polaris beads + wave beads. The necklace has a length of 50 cm. With 20 mm large beads, however, the worn length is slightly shorter. The safe, matt Magnetic clasp is made of stainless steel.

Necklace made of 20 mm beads. Colors: Purple, copper, crystal clear, mix. Resin beads, coarse glitter beads, polaris beads + wave beads. The necklace has a length of 50 cm. With 20 mm large beads, however, the worn length is slightly shorter. The safe, matt Magnetic clasp is made of stainless steel.